Author Index

A

  • Ahl Sarmadi, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Ahmadi, H. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
  • Ahmadian, M. The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ̊C [Volume 36, Issue 1, 2017, Pages 1-12]
  • Akbari, A. R. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
  • Akbari, G. H. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
  • Akbari, G. H. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
  • Akbari, M. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
  • Akbarzadeh, F. Z. Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
  • Alamolhoda, S. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
  • Alizadeh, A. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
  • Alizadeh, M. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
  • Amiri Moghaddam, A. In-situ Synthesis of WC-Co Composite in WO3- Co3O4- C System by Carbothermic Reduction Method [Volume 36, Issue 1, 2017, Pages 121-130]
  • Amirjani, A. Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
  • Asadrokht, M. Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]
  • Asghari, A. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
  • Asghari, S. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
  • Ashrafizade, F. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
  • Ashrafizadeh, S. F. Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
  • Askari, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
  • Atapoor, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Azadrooy, D. The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]

B

  • Bakhshi, M. H. Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
  • Bakhshi, S. R. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
  • Bakhtiari, H. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
  • Barati, M. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
  • Bazdar, F. The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
  • Behjat, A. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Benvidi, N. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
  • Borhani, G. H. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
  • Bozorgmehr, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]

C

  • Chavilian, H. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]

D

  • Daneshvar e Asl, S. Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
  • Dehghani Varnamkhasti, A. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]

E

  • Ebrahimi, F. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
  • Edris, H. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Enayati, M. H. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
  • Esmaeilzadeh, M. K. Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]

F

  • Farjam Hajiagha, Kh. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
  • Farmanesh, K. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
  • Fathi, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
  • Fazlali, A. R. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]

G

  • Ghasemi, B. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
  • Goodarzi, M. Thermodynamic Description of the Ti–O System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]

H

  • Haghshenas, D. Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
  • Hajizamani, M. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
  • Hosseini, S. R. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
  • Hosseinzadeh, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]

I

  • Illbeigi, M. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]

J

  • Jafarian, M. Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
  • Jenabali-Jahromi, S.A. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]

K

  • Kafili, G. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
  • Karimzadeh, F. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
  • Kazazi, M. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
  • Khanzadeh Gharah Shiran, M.R. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
  • Khoobroo, M. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
  • Kouhi, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]

M

  • Maghsoudi, E. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
  • Maghsoudi, E. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
  • Mahmoodi, M. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
  • Maleki, A. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
  • Meratian, M. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
  • Milani, M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
  • Milani, M. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
  • Mirhaj, M. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
  • Mirkazemi, S. M. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
  • Mirkazemi, S. M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
  • Mohammadi, A. H. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
  • Mohammad Javadi, M. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
  • MohammadPoor, P. Thermodynamic Description of the Ti–O System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]
  • Mohammadzadeh, R. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
  • Mohtadi Bonab, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Mostaan, H. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
  • Mottaghi, M. The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ̊C [Volume 36, Issue 1, 2017, Pages 1-12]
  • Mousavi, S. E. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
  • Mousavi Ghahfarokhi, S. E. The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
  • Movahedi, B. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]

N

  • Nilforushan, M. R. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
  • Niroumand, B. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
  • Niroumand, B. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
  • Niroumand, B. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
  • Norouzbeigi, R. Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]

O

  • Otroj, S. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]

P

  • Pakmanesh, M. R. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
  • Poorkabirian, M. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
  • Prabhakaran, Molamma Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]

R

  • Raeissi, K. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
  • Raeissi, K. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
  • Rafiei, M. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
  • Rajabi, M. Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
  • Ramakrishna, Seeram Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
  • Rashtchi, H. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
  • Razavi, S. A. Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
  • Razmjou, A. Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
  • Rezaeian, A. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
  • Rizaneh, S. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
  • Rostamnejadi, A. Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]

S

  • Sabooni, S. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
  • Sadrnezhaad, S. K. Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
  • Safi, S. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
  • Saghafian, H. The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]
  • Seyyed Afghahi, S. S. Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
  • Shahjooyi, T. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
  • Shamanian, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
  • Shamanian, M. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
  • Shamanian, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
  • Shamanian, M. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
  • Shamanian, M. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
  • Shirani, E. Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
  • Shybani, A. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
  • Soltani, M. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
  • Soltanipour, A. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
  • Szpunar, J. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]

T

  • Tajalli, M. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
  • Tavoosi, M. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]

V

  • Velayi, E. Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]

Z

  • Zahraee, S. M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
  • Zakeri, A. Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
  • Zakeri, A. R. Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]

ارتقاء امنیت وب با وف ایرانی